Standard SD462, Operator'S Manual

Page: 289 / 558

Printing with NetWare
39
5
G
Click the [ NetWare ] tab, and then make the following settings:
A
In the [ Logon Mode ] area, select [ File Server Mode ] or [ NDS mode ] .
Note
❒
If [ File Server Mode ] is selected, a connecting destination will be chosen
based on the string entered in step
C
.
❒
If [ NDS mode ] is selected, a connecting destination will be chosen based
on the string entered in step
D
.
B
In the [ Print Server Name ] box, enter the name of the print server.
Important
❒
Use the same name as that of the print server name to be set from NW
admin (
M
-
C
).
Limitation
❒
Enter up to 47 alphanumeric characters.
C
In the [ File Server Name ] box, enter the name of the file server in which a
print server is to be created.
By clicking [ Browse... ] , you can select a file server among those listed in the
[ Browse... ] dialog box.
Limitation
❒
Enter up to 47 alphanumeric characters.
D
In the [ NDS Tree ] box, enter the NDS tree name in which to make the file
server.
By clicking [ Browse... ] , you can select the NDS tree name and NDS context
name from their lists.
Limitation
❒
Enter up to 32 alphanumeric characters (“-” and “_” can be used).
E
In the
[ NDS Context ]
box, enter the context in which the print server is to
be created.
Limitation
❒
Enter up to 127 alphanumeric characters.
F
In the [ Print Server Operation Mode ] area, click [ As Remote Printer ] .
G
In the [ Remote Printer No. ] box, enter the number of the printer.
Important
❒
Use the same number as that of the printer to be created in the print
server (
N
-
D
.)
H
Click [ OK ] to close the [ NIB Setup Tool - Network board list ] dialog box.