Standard SD462 Operator'S Manual Download Page 331

Page: 331 / 558

Remote Maintenance by telnet

❖

Display

The following command displays current tcpip, appletalk, netware, and smb
settings.

msh> set protocol

Printer status

The following command can be used to get information about the current print-
er status:

msh>

command

Note

❒

More information about print jobs is displayed if the ID number is added af-
ter the prnlog command.

Reference

For details about the meaning of the data returned using these commands, see
p.100 “Understanding Displayed Information”.

Network interface module configuration settings information

Use the “show” command to display the network interface module configura-
tion settings.

msh> show [-p]

Note

❒

Add “-p” (as above) to have the information displayed one screen at a time.

Reference

For details about the meaning of the data returned using this command, see
p.104 “Configuring the Network Interface Module”.

System log information

Use the “syslog” command to display information stored in the system log.

msh> syslog

Reference

For details about the displayed information, see p.108 “System Log Informa-
tion”.

Command

Information that is displayed

status

Status of printer.

Information about print jobs.

info

Information about the paper tray, output tray, printer
language of printer.

prnlog [ID]

Lists the last 20 print jobs.

Summary of Contents for SD462












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands

Standard SD462, Operator'S Manual

Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands