Standard SD462, Operator'S Manual

Page: 282 / 558

Using the Printer Function
32
5
M
Restart the printer.
Note
❒
To make sure the printer is correctly configured, enter the following from
the command prompt:
F:> USERLIST
❒
If the printer works as configured, the name of the print server appears as
an attached user.
NetWare 4.x, 5/5.1, 6
Important
❒
You must set up the print server using NDS mode in NetWare 4.x, 5/5.1, 6.
❖
To use NetWare 5/5.1, 6
• Use the printer as a print server. Do not use it as a remote printer in a
PureIP environment.
• If you use PureIP, configure the printer to use TCP/IP. For details about
how to make the settings, see p.7 “Setting Up the Machine on a Network”.
A
Log on to the file server as an administrator, or equivalent.
B
Start SmartDeviceMonitor for Admin.
C
On the [ Group ] menu, point to [ Search Device ] , and then click [ IPX/SPX ] or
[ TCP/IP ] .
A list of machines appears.
D
In the list, select the printer for which you want to change configuration.
E
On the [ Tools ] menu, click [ NIB Setup Tool ] .
NIB Setup Tool starts.
Reference
If you use NetWare 5/5.1 or NetWare 6 in a PureIP environment, see p.34
“Using PureIP in the NetWare 5/5.1, 6 environment”.
F
Click [ Wizard ] , and then click [ OK ] .
G
If necessary, enter the print server name in the [ Device Name ] box, and then
click [ Next ] .
H
Select the [ NetWare ] check box, and then click [ Next ] .