Standard SD462 Operator'S Manual Download Page 335

Page: 335 / 558

Remote Maintenance by telnet

❖

Setting timeout

You can specify the timeout interval in use when receiving data from the net-
work.

msh> diprint timeout

[30~65535]

Note

❒

The default is 300 seconds.

❖

Bidirectional configuration for the direct printing port

Use this setting to configure whether the direct printing port is bidirectional
or not. The default is “off”.

msh> diprint bidirect {on | off}

Note

❒

If you select “on”, SmartDeviceMonitor for Client or Standard TCP/IP on
Windows 2000 might not work correctly.

Netware

Use the “netware” command to configure the NetWare settings such as the print
server name or file server name.

msh> netware

parameter

Parameter

Settings

pname

Enter the NetWare print server name using up to 47 characters.

fname

Enter the NetWare file server name using up to 47 characters.

encap {802.3 | 802.2 | snap
| ethernet2 | auto}

Select the encap type.

rnum

Specify the remote printer number.

timeout

Set the timeout.

mode {pserver | ps}

Select the print server mode.

mode {rprinter | rp}

Select the remote printer mode.

context

Specify the NDS context name.

sap_interval

Specify the SAP intervals.

Each interval can be set to between 0 and 3600 seconds in one-
second increments.

Specify “login with a selected file server” as the login mode.

Specify “login with a selected NDS tree” as the login mode.

tree

NDS tree name

Select the NDS tree to log on to.

Summary of Contents for SD462












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands

Standard SD462, Operator'S Manual

Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands