Standard SD462 Operator'S Manual Download Page 541

Page: 541 / 558

2. Printer Utility for Mac

Using Printer Utility for Mac, you can download fonts, change the printer's
name, and so on.

Limitation

❒

If a Macintosh and printer are connected by USB, you cannot use Printer Util-
ity for Mac.

❒

Printer Utility for Mac functions that require the hard disk cannot be used if
no hard disk is installed on the printer.

Note

❒

Printer Utility for Mac is included on the CD-ROM labeled “ Printer Drivers
and Utilities”.

❒

Printer Utility for Mac requires Mac OS 7.6.1-9.x, Mac OS X 10.1.x, 10.2.1 or
later.

❒

Mac OS X 10.0.x and 10.2 are not supported.

Installing Printer Utility for Mac

Follow the procedure below to install Printer Utility for Mac on the computer.

Start the Macintosh.

Insert the CD-ROM into the CD-ROM drive.

The CD-ROM icon appears.

Double-click the hard disk icon to open it.

Double-click the CD-ROM icon.

The contents of the CD-ROM appear.

Double-click the

[

PS Utility

]

folder.

Double-click the

[

Printer Utility for Mac

]

folder.

Double-click the

[

Mac OS

]

folder.

Note

❒

When using Mac OS X, double-click the

[

Mac OS X

]

folder.

Double-click the

[

English

]

folder, drag the

[

Printer Utility for Mac

]

file, and then

drop it into the Macintosh hard disk.

Drag the CD-ROM icon and drop it into

[

Trash

]

to eject the CD-ROM.

Printer Utility for Mac is installed.

Summary of Contents for SD462












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands

Standard SD462, Operator'S Manual

Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands