Standard SD462, Operator'S Manual

Page: 534 / 558

PostScript3 printer driver - Setting Up for Printing
46
1
❖
[ Skip Feed ]
• Use to make the interval between paper feeds longer, allowing the ink to
dry.
• Use to print on a paper longer than the standard size.
Limitation
❒
The maximum length of paper that can be printed using Skip Feed is 460
mm. However, when printing on paper longer than 432 mm, the delivered
paper may fall off the paper delivery end plate. Therefore, you should hold
the paper so that it does not fall off.
❖
[ Separate ]
When set to “On”, classifying will occur whenever the document data changes.
❖
[ Enable Short Master ]
You can select whether to set the length of the master automatically.
❖
[ Rotate Image ]
When set to “180 degrees”, the image will be rotated 180 degrees and printed.
This is very convenient when printing on envelopes. See p.50 “Printing onto
envelopes”
❖
[ Brightness ]
Seven phases can coordinate brightness of the whole printed image.
Note
❒
Brightness of color of character is not changed.
❖
[ Line Density (lpi) ]
You can select the screen ruling (resolution).
❖
[ Separate into CMYK ]
It is possible to output only the color selected from Cyan, Magenta, Yellow,
and Black. If “Don't Separate” is selected, separation will not be done.