manualshive.com logo in svg

Standard SD462, Operator'S Manual

The Standard SD462 Operator's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and insights on operating and maintaining our SD462 product. Accessible at manualshive.com, users can conveniently download their copy and gain a complete understanding of this outstanding product.

Share
Download
background image

Error Messages on the Display

99

9

Error Messages on the Display

This section describes the most common network-related messages that appear
on the display. If a message not described here appears, act according to that
message.

Reference

Before turning the main power off, see “Turning On the Power”, 

Operating In-

structions

.

Message

Causes

Solutions

Ethernet Error

An error has occurred in the 
Ethernet module.

Turn off the main power 
switch, and back on again. If 
the message appears again, 
contact your sales or service 
representative.

IEEE802.11b Error

IEEE 802.11b card was not in-
serted when the printer was 
turned on, or it was pulled out 
after the printer turned on. An 
error has occurred in the IEEE 
802.11b card.

Turn off the main power 
switch, and check the card is 
installed correctly. If the mes-
sage appears again, contact 
your sales or service repre-
sentative.

Summary of Contents for SD462















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SD462

WANHAO DUPLICATOR 7 Getting Started Manual preview
DUPLICATOR 7
Brand: WANHAO Pages: 2

Brands by name

Popular brands

Load more brands