49
Activating and configuring the
Log servers function
To allow the logs of the Siedle
hardware terminals to be viewed at
a central location, the Log Servers
function must be activated and
configured.
Procedure
1
Under the
General
index tab,
scroll through the entries in the list
field using the scroll bar until the
entry
Log Servers
entry is displayed.
2
In the list field, activate the entry
Log Servers
in order to activate the
log service.
3
Click on the
IP address
input
field.
4
Enter the IP address of the
Microsoft server.
5
Click on
Add
to adopt the input.
6
Click on
Apply
to adopt the
changes.
Remarks
• The server name can be optionally
assigned.
• If you do not activate the Log
Servers function, the logs of Siedle
hardware terminals will not be
stored and cannot be evaluated if
required. The Siedle software clients
(e.g. concierge) are not affected by
this, as their logs are stored directly
on the used terminal.
2.
4.
5.
6.