107
Optional steps (21-25)
Note:
The configuration steps
21–25 are optional and only nec
-
essary if the user also wishes to call
to the Access system via the SIP
provider account itself. This results in
mapping being carried out between
the SIP provider connection and a
call number from the Access system.
21
Change to the area
Incoming
call numbers
.
22
Click in the area
Incoming call
numbers
on
Add
in order to con
-
figure a newly incoming call number.
23
Enter the
country dialling code
into the relevant field.
24
Enter the
dialling code
into the
relevant field.
25
Enter an individual telephone
number in the
Number
field, but
with a consecutive call number block
(e.g. 123-40 to 123-49 -> 123),
enter the lowest Extension (e.g. 40)
at the
beginning of the range
and
the highest Extension (e.g. 49) at the
end of the range
.
Note:
Configure all incoming call
numbers which can come in over
the connected provider / which were
assigned to this gateway (e.g. PBX
extensions from a central telephone
system).
26
Click on
Save
to take the
changes over in the system.
27
Carry out a restart of the Access
system (menu:
System mainte-
nance > Restart
).
