52
Activating and configuring the
Bootfile name
For the Siedle hardware terminals,
access to the Access configuration
file is required. The network path
to the Access configuration file is
formed from the entries Boot Server
Host Name and Bootfile Name.
Procedure
1
Under the
General
index tab,
scroll through the entries in the list
field using the scroll bar until the
entry
Bootfile Name
is displayed.
2
In the list field, activate the entry
Bootfile Name
in order to enter the
bootfile path.
3
Click on the input field
String
value
.
4
Enter the complete path of the
Access bootfile:
SSS/Axxx/locator.
xml
5
Click on
Apply
to adopt the
changes.
6
Click on
OK
to close the
Scope
Options
window.
7
Close any remaining open win
-
dows which you had opened for this
configuration.
8
This concludes the configuration
of the newly created IPv4 address
range and you are now back on
the desktop of the server operating
system.
Remarks
• If you do not activate and con
-
figure the Boot Server Host Name,
the Siedle hardware terminals
cannot access the necessary config
-
uration files and cannot be used in
the Access network.
The path
SSS/Axxx/locator.xml
is
prescribed by the Access server and
may not be changed.
4.
2.
5.
Setting up the server operating system
Setting up and configuring the DHCP server service
