SSS Siedle ASH 670-04 M Commissioning Instructions Download Page 148

Page: 148 / 166

148

Creating a user account

If the user rights assigned to your
user account allow, here you can
create new user accounts and edit or
delete existing user accounts.

Procedure - Creating a user

account:
1

In the navigation area, click on the

System maintenance

menu.

The

System maintenance

opens up.

In the navigation area, click in the

opened

Administrators

folder on

Accounts

The

Administrators

folder opens

up in the navigation area.

In the navigation area, click in the

opened

Administrators

folder on

Accounts

The

Accounts

page opens up in

the content area.

Click on

Add

to create a new user

account.

The

Create administrator

page

opens up in the content area.

Roles and user accounts

Accounts

Summary of Contents for ASH 670-04 M







































































































































































Search results

Summary of Contents for ASH 670-04 M

Reviews:

SSS Siedle ASH 670-04 M, Commissioning Instructions, Page: 148 / 166

Search results

Summary of Contents for ASH 670-04 M

Reviews: