SSS Siedle ASH 670-04 M Commissioning Instructions Download Page 42

Page: 42 / 166

Specifying IP address for routers/
gateways

To make network users within the
assigned IP address range acces

sible to another network (e.g. the
internet), you can specify the IP
address of one or more routers/
gateways.

Procedure
1

Click on the

IP address

input

field.

Enter the IP address of the router/

gateway.

Click on

Add

to adopt the input.

If applicable, repeat the process
in order to define additional IP
addresses of other

routers/gate

ways

Click on

Next

The

Domain Name and DNS

Servers

menu opens up.

Remark

• If the Access server is operated in
a closed network without connec

tion to the internet or a different
network (stand-alone operation),
no entries are required in this input
screen.

Setting up the server operating system

Setting up and configuring the DHCP server service

Summary of Contents for ASH 670-04 M







































































































































































Search results

Summary of Contents for ASH 670-04 M

Reviews:

SSS Siedle ASH 670-04 M, Commissioning Instructions, Page: 42 / 166

Search results

Summary of Contents for ASH 670-04 M

Reviews: