SSS Siedle ASH 670-04 M Page 15 Commissioning Instructions Download

Page: 15 / 166

Installing the server operating

system

You must install the Microsoft
server operating system in the

full

installation variant

–

server with

graphic user interface

on the

server hardware.

Procedure
1

Start the installation of the server

operating system.

As an installation option for the

server operating system, select the

full installation

–

Server with

graphic user interface (server
graphic shell)

variant.

Execute the installation of the

server operating system.

Installation and operating con

ditions

In order to allow the Siedle Access
server to be correctly operated, you
must fulfil the following installation
requirements:

The server hardware or virtual

machine (from VMware vSphere 6)
you have provided complies at least
with the technically specified system
requirements for the Access server.

As a server operating system,

you must install

Microsoft

Server 2012 R2 Standard

Datacenter

as a standard pre-in

stallation (Server with graphic user
interface).

Assign a static IP address for the

server operating system.

4 Optionally:

Assign the server

operating system the role of the

DHCP server

and where applicable

the

NTP server

, if there is no DHCP

and NTP server operating in your
network.

Only activate the services neces

sary for operating the Access server,
and where applicable activate the
NTP server.

In the configured server operating

system, install only the Siedle Access
system. In addition, no other server
services may be installed, as this
can result in impaired performance
of the Siedle Access server. (

Rule:

1 server service per server operating
system installation.)

The network infrastructure corre

sponds to the prescribed specifica

tion for Siedle Access.

All network users of the Access

server are operated using this net

work infrastructure.

Setting up the server operating system

Microsoft Server 2012 R2 Standard

Remark

• The values for IP addresses and
network entries used in these com

missioning instructions are intended
as examples only and can deviate
from your network environment.

Summary of Contents for ASH 670-04 M







































































































































































Search results

Summary of Contents for ASH 670-04 M

Reviews:

Related manuals for ASH 670-04 M

Brands by name

Popular brands

SSS Siedle ASH 670-04 M, Commissioning Instructions

Search results

Summary of Contents for ASH 670-04 M

Reviews:

Related manuals for ASH 670-04 M

Brands by name

Popular brands