manualshive.com logo in svg

SSS Siedle ASH 670-04 M, Commissioning Instructions, Page: 14 / 166

Share
Download
SSS Siedle ASH 670-04 M Commissioning Instructions Download Page 14

14

Commissioning

System version and network configuration

Changing/adapting the network 
configuration

Siedle Access server Hardwares are 
delivered with a standard network 
configuration. The Siedle Access 
server hardwares are preconfigured 
as DHCP and NTP servers. 
Depending on the customer net

-

work infrastructure and the already 
available/set up network services, it 
can happen that the standard con

-

figuration of the Siedle Access server 
hardware has to be changed.

Use latest system version

The Access server hardware / 
Access Professional as a hardware/
software variant are always delivered 
in the latest Access system version.
By the time commissioning takes 
place on the customer's premises, 
it is possible that a newer system 
version exists.

Remarks

• From Access server 3.0.0 onwards, 
the updating process of the Access 
server has been revised. The system 
updating process will not be 
launched in future via the Access 
server, but carried out by the Access 
server installer (see chapter System 
update). External access to the new 
system version is reserved to Access 
Certified Partners "ACP". More 
recent system versions can incur a 
charge.
• Updating Access Professional is 
optionally possible by an ACP. Using 
the services of an ACP can also incur 
a charge.
• If possible, always use the latest 
system version of the Access server 
and always keep this version up to 
date.

Procedure
1 

Have an ACP check whether there 

is a more recent Access Professional 
system version available.

2 

If a newer system version exists, 

where applicable have this delivered, 
installed or updated by the ACP 
against a charge.

• In the case of a system version 
change (upgrade) to Access Profes-
sional from V 4.0.0, the hardware ID 
changes. In addition, the optimum 
licence package and the right main

-

tenance contract for the customer/
operator/end user can be selected 
from the new user licence model. 
Before carrying out an upgrade, con

-

tact the Access Service Center.
• A system update from  

Access V 3…

 to 

Access Profes-

sional V 4…

 is possible.

• A system update from 

Access Professional V 4.0.0

 

upwards is only possible if a valid 
maintenance contract exists. This 
can be concluded against a fee.

Summary of Contents for ASH 670-04 M







































































































































































Reviews:

No comments