134
Access software concierge
(ASC)
In this menu, you can create and
configure the Access software con
-
cierge (ASC). The ASC is the central
switchboard for the entire Access
system and can be operated on a
Windows-based computer.
Remarks
• If the PC with the installed soft
-
ware client is not located in the
actual Access network, your system
supervisor/network administrator
must set up correct routing between
the networks by means of a separate
network infrastructure. For this,
extended knowledge of the network
is required.
• Several telephone scripts are avail
-
able to choose from as standard in
the Access system:
Secondary signal unit:
Cannot
be used here, as the software client
does not make available a stationary
connectable potential-free contact.
Camera actuation:
Cannot be used
here, as the software client does not
make available a stationary connect
-
able potential-free contact.
Procedure –
Configuring the ASC
1
In the navigation area, click on the
Users
menu.
2
The
Users
menu opens up.
3
In the navigation area, in the
opened
Users
menu, click on the
required user within the existing
Project/Folder structure
.
4
The page
Edit user: [name of
the user]
opens up in the content
area.
5
Click on
Add
.
6
A drop-down menu opens up.
7
Select
Device
in this drop-down
menu.
8
A drop-down menu opens up.
9
Select
Siedle ASC 170
in this
menu.
10
The
Create device
page opens
up in the content area.
11
Carry out all inputs in the
General
area.
12
Always assign meaningful names
and descriptions.
Note
• The fields
Call number
and
Assignment
are automatically
issued by the Access system and can
be edited at any time.
13
Check the
Call number
and
change it if required, for example to
implement your call number system.
14
Check the
Assignment
and
change/supplement it if required.
15
The
software type
is an infor
-
mation field and cannot be edited.
16
The
Account name
is an infor
-
mation field adopted from the high
-
er-level user and cannot be changed.
17
The
password
is an information
field adopted from the higher-level
user and can only be edited centrally
at the higher-level user.
18
Activate/deactivate the option
Use as autonomous telephone
,
if you wish the software client to be
used
without
(
Yes
) or
with
(
No
)
parallel operated hardware terminals
(e.g. AHT)(default setting:
Yes =
without
).
Remarks
• If a hardware terminal is operated
in parallel then the software client
only shows the video image, while
the hardware terminal takes over
audio communication.
• If the option
No
is defined, the
additional configuration point
CTI
device
appears at which the hard
-
ware terminal you wish to operate
in parallel can be selected. For this, a
hardware terminal must be located
in the same user.
19
Under CTI device, select the
required device for audio commu
-
nication if you have deactivated the
option
Use as autonomous tele-
phone
(
No
=
with
).
20
Leave the selection
Standard
telephone script
under
Telephone
script
unchanged, as the software
client does not provide a poten
-
tial-free contact capable of sta
-
tionary connection.
21
Click on
Save
to take the
changes over in the system.
22
Download the
ASC
from the
login page of the Access server
(
Login page > Downloads >
Siedle Access software
).
23
Install the
ASC
on the required
Windows-based computer.
24
Start the
ASC
and log in using
the relevant login data (
Account
name
and
Password
).
25
Carry out a test connection.
26
Configure each
ASC
using the
same procedure.
Configure devices
ASC 170-…
