CALIBRATION PROCEDURE
NI PXIe-4339
8 Ch, 24-bit, 25.6 kS/s Universal Bridge Input Module
This document contains the verification and adjustment procedures for the National Instruments
PXIe-4339 module. For more information about calibration solutions, visit
.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
Test Equipment......................................................................................................................... 3
Voltage Mode Accuracy Verification............................................................................... 6
Ratio Mode Accuracy Verification................................................................................... 7
Software
Calibrating the NI PXIe-4339
requires the installation of NI-DAQmx on the calibration system.
Driver support for calibrating the NI PXIe-4339 was first available in NI-DAQmx 14.5.1. For
the list of devices supported by a specific release, refer to the NI-DAQmx Readme, available on
the version-specific download page or installation media.
You can download NI-DAQmx from
. NI-DAQmx supports LabVIEW,
LabWindows™/CVI™, C/C++, C#, and Visual Basic .NET. When you install NI-DAQmx, you
only need to install support for the application software that you intend to use.
ni.com/manuals
Deutsch
Français
