SSD 605C, Product Manual

Page: 71 / 236

Programming Your Application
6-5
605C Frequency Inverter
Function Block Descriptions
The following function block descriptions are arranged in alphabetical order. They each appear
as a Menu in the FUNCTION BLOCKS menu at level 2.
Note: Remember to select the correct mode, Parameterisation or Configuration, whilst editing.
Refer back to “Modifying a Block Diagram”, page 6-1. You must select the Advanced
view level to see the FUNCTION BLOCKS menu at level 2, go to MENUS menu at level 1.
Function Block Page Function Block Page
ANALOG DIGIN 6-6 OPERATOR MENU 6-43
ANALOG INPUT 6-8 OP STATION 6-44
ANALOG OUTPUT 6-11 PASSWORD 6-46
AUTO RESTART 6-13 PATTERN GEN 6-47
AUTOTUNE 6-15 PID 6-48
BRAKE CONTROL 6-16 PRESET 6-50
COMMS CONTROL 6-17 RAISE/LOWER 6-52
CURRENT FEEDBACK 6-18 REFERENCE 6-53
CURRENT LIMIT 6-20 SEQUENCING LOGIC 6-55
CUSTOM SCREEN 6-21 SETPOINT SCALE 6-56
DEMULTIPLEXER 6-23 SKIP FREQUENCIES 6-58
DIGITAL INPUT 6-24 SLEW RATE LIMIT 6-60
DIGITAL OUTPUT 6-25 SLIP COMP 6-61
DYNAMIC BRAKING 6-26 STABILISATION 6-62
ENCODER 6-27 STALL TRIP 6-63
FLUXING 6-28 STOP 6-64
FLYCATCHING 6-30 SYSTEM PORT (P3) 6-65
INJ BRAKING 6-32 SYSTEM RAMP 6-66
I/O TRIPS 6-33 TEC OPTION 6-68
I*t TRIP 6-34 TRIPS HISTORY 6-69
JOG 6-35 TRIPS STATUS 6-70
LOCAL CONTROL 6-36 UNDERLAP COMP 6-72
LOGIC FUNCTION 6-37 VALUE FUNCTION 6-73
MINIMUM SPEED 6-41 VECTOR FLUXING 6-80
MULTIPLEXER 6-42 VOLTAGE CONTROL 6-81
ZERO SPEED 6-82