SSD 605C, Product Manual

Page: 112 / 236

6-46
Programming Your Application
605C Frequency Inverter
PASSWORD
This function block contains options
associated with password protection for the
Operator Station.
MMI Menu Map
1 PASSWORD
ENTER PASSWORD
CHANGE PASSWORD
PASSWORD
0000 – [ 7] ENTER PASSWORD –
0000 – [ 8] CHANGE PASSWORD –
FALSE
–
[361] PROTECT LOCAL SP
–
FALSE – [364] PROTECT OP MENU –
or
MMI Menu Map
1
SETUP PARAMETERS
2
FUNCTION BLOCKS
3
MENUS
4 PASSWORD
ENTER PASSWORD
CHANGE PASSWORD
PROTECT LOCAL SP
PROTECT OP MENU
Parameter Descriptions
ENTER PASSWORD Range: 0000 to FFFF
Entering a password equal to the password held in the inverter unlocks the Operator Station.
Entering a value that is not equal to the password held in the inverter locks the Operator Station.
When locked, no parameters in the inverter may be modified from the Operator Station (with the
possible exception of the parameters in the OPERATOR menu, see PROTECT OP MENU
below).
CHANGE PASSWORD Range: 0000 to FFFF
This parameter is used to initially set and if necessary change the password held in the inverter.
When the password is set to 0000, the Operator Station is always unlocked.
PROTECT LOCAL SP Range: FALSE / TRUE
Enables password protection of the local setpoint. When set to TRUE, the local setpoint is read-
only whenever the inverter is password locked. When FALSE, the local setpoint can be adjusted
regardless of the password.
PROTECT OP MENU Range: FALSE / TRUE
Enables password protection of all parameters shown in the OPERATOR menu (except for the
local setpoint entry). When set to TRUE, the parameters are read-only whenever the inverter is
password locked. When FALSE, the parameters can be adjusted regardless of the password.