5-11
P
ROTEGÉ
® 616 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
, F
EBRUARY
2001
11.1.6 - Extension - Location
- This is an informa-
tional field that displays the physical port location
of each extension on the female 25 pair connector.
F1
F2
F3
LOCATION: 1-01
back
next
Category 1 - Extension - Location
Figure 5-16: Extension Location Screen
11.1.7 - Extension - Extension Position
- To change
an extension number to an unassigned two-digit
number, press the F3 softkey, "Chg," and enter the
new extension number.
Default:
The system extension numbers are 10 to 17
in order of their port position. If an analog adapter
is connected, the extensions using the B2 channel
are numbered from 58 to 65.
F1
F2
F3
EXT POSITION: 10
back
next
chg
Category 1 - Extension - Extension Position
Figure 5-17: Extension Position Screen
11.1.8 - Extension - Function Key Allow
- To permit
or prohibit the use of features available by using the
Function key on an extension, press the F3 softkey,
"Chg," to toggle between "Yes" and "No."
If the Function key is disabled, then if it is
pressed on a digital keyset the system will not take
any action. This would cause all feature access codes
to be prohibited. An exception to this would be the
features, Speed Dialing, Specific Line Access and
Call Park.
The same is true for a single line telephone. If
Function Key Allow is set to No the “#” is disabled.
Default:
Function key is allowed for all extensions.
F1
F2
F3
FUN KEY ALLOW: Y
back
next
chg
Category 1 - Extension - Function Key Allow
Figure 5-18: Function Key Allow Screen
