11. Enter Database
Programming
To begin customizing the database, have an idle
business display phone available for programming.
From the idle keyset, enter the programming inter-
face by pressing the key combination of Function, #,
*. If successful the following screen will be dis-
played:
Figure 5-2: Password entry screen for Database Programming.
Enter the password and press the F2 softkey to
access the programming screens. At default the data-
base password is “000000.” Remember to change the
password often to a unique number to avoid access
to the database by unauthorized personnel. To
change a password, see “4. Resource, DB Password.”
The new password should be written down and
stored in a safe place.
5-7
P
ROTEGÉ
® 616 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
, F
EBRUARY
2001
Resource (cont’d)
Line Copy
Any line
None
Extension Copy
Any extension
None
Dial Wait Time
0 - 8 seconds
1
KSU Revision
N/A
N/A
Feature Key Copy
Any extension
None
with feature key programming
Restriction
Dialing Table - Digit Interval
100 number intervals
1st interval - 0, #
2 -100 intervals - Null
Control
Voice Mail Group Member
Any valid voice mail extension number
Empty
Voice Mail - Prefix Code
4 digit maximum
ICM/VM - 12
Transfer - 11
Busy Fwd - 11
No_Ans - 11
Direct Fwd - 11
Suffix Code
2 digits maximum
Null
Disconnect Digits
8 digits maximum
******
System Warm Start
N/A
N/A
System Cold Start
N/A
N/A
System Type
MF or KF
MF
Category
Feature
Valid Entries
Default
Default Database Settings
(cont’d)
Table 5-4: Default Settings
*Extension numbers 58 - 65 are only valid if using the B2 channel of a port.
F1
F2
F3
DB PSWD: _
bksp
show
chg
