XYGATE
®
Data Protection
™
Reference Manual
XYPRO Technology Corporation
72
Proprietary and Confidential
A11: AUDIT_WARNING_PASS
This keyword determines whether or not XDP will write successful access attempts to
the XDP audit logs when WARNING_MODE is ON.
Syntax:
AUDIT_WARNING_PASS { ON | OFF }
If ON, successful access attempts will be audited while in warning mode.
If OFF, successful access attempts will not be audited while in warning mode.
The default value is OFF.
This value is set during installation, but can be changed at any time.
Note:
This is a GLOBAL setting but can be overridden by individual DPGroup entries
in the DPACL File.
A12: BACKUPCPU
XYGATEDP can run as a NonStop process pair if a backup CPU is specified in the
DPCONF file with the BACKUPCPU setting.
If the primary process of XYGATEDP is started in the same CPU that is specified for
the backup process, then a warning is issued and the system is searched for another
CPU to use, beginning at CPU 0.
If the backup CPU is not available when XYGATEDP starts, then a CPU search is
done for another CPU to use beginning at CPU 0.
BACKUPCPU must be present when XYGATEDP is started to have an effect. Adding
BACKUPCPU to DPCONF later and recompiling/reloading the XDP configuration with
a running XYGATEDP process will not cause the XYGATEDP process to start a
backup process; removing BACKUPCPU from the DPCONF file and
compiling/reloading the configuration will not cause an existing XYGATEDP process to
stop its backup process.
If a value for BACKUPCPU is not found in the DPCONF file, then XYGATEDP will not
run as a NonStop process pair.
Syntax:
BACKUPCPU <cpu number 0-15>
Example:
BACKUPCPU 3
Summary of Contents for Trinitron WEGA KV-DZ29M91
Page 2: ......