XYGATE
®
Data Protection
™
Reference Manual
XYPRO Technology Corporation
71
Proprietary and Confidential
A8:
AUDIT_NONPROT_FILE_ACCESS
This keyword controls whether or not XDP audits access to files that are not defined to
be protected in the DPACL.
Syntax:
AUDIT_NONPROT_FILE_ACCESS {ON | OFF}
Example:
AUDIT_NONPROT_FILE_ACCESS ON
A9:
AUDIT_NORECORD
This keyword determines whether or not XDP will write audits for access requests that
do not meet the selection criteria for any DPGroups defined in the DPACL file and are,
therefore, “No Record”.
Syntax:
AUDIT_NORECORD { ON | OFF }
If ON, “No Record” results will be audited.
If OFF, “No Record” results will not be audited.
The default value is OFF.
Note:
This is a global setting that cannot be overridden by entries in the DPACL file;
there is no equivalent keyword in the DPGroups. Therefore, auditing of
“No Records” is either ON or OFF for an entire system.
A10: AUDIT_WARNING_FAIL
This keyword determines whether or not XDP will write unsuccessful access attempts
to the XDP audit logs when WARNING_MODE is ON.
Syntax:
AUDIT_WARNING_FAIL { ON | OFF }
If ON, unsuccessful access attempts will be audited while in warning mode.
If OFF, unsuccessful access attempts will not be audited while in warning mode.
The default value is OFF.
This value is set during installation, but can be changed at any time.
Note:
This is a GLOBAL setting but can be overridden by individual DPGroup entries
in the DPACL File.
Summary of Contents for Trinitron WEGA KV-DZ29M91
Page 2: ......