Sony Trinitron WEGA KV-DZ29M91 Service Manual Download Page 53 | Manualshive

Page: 53 / 170

Sony Trinitron WEGA KV-DZ29M91 Service Manual Download Page 53

XYGATE

®

Data Protection

™

Reference Manual

Chapter 6. XDP Auditing and Audit Reports

XYPRO Technology Corporation

33

Proprietary and Confidential

6.2

Running XDP_REPORT Interactively

To generate XDP audit reports, use the XDP_REPORT macro. The macro will display
a screen with all the criteria that you can modify in order to limit the audit records to be
included in a report.

Syntax:

XDP_REPORT [-D]

Example: How to run an audit report on the host

$SYSTEM XYGATEDP 1>

XDP_REPORT

Note:

Without the –D option, only the summary of the ENFORM report will be shown

unless errors occur in the ENFORM run. If an error occurs, the entire ENFORM
run will be displayed. If –D is specified, the entire ENFORM run will be displayed
even if there are no errors.

Choose an option:
A: Audit File                 :$SYSTEM.XYGATEDP.AUDIT
B: Report date range         :2013-05-06 00:00 to 2013-05-06 23:59
C: Subject userid             :*.*
D: Subject Login name         :*
E: Subject System             :*
F: Subject Terminal           :*
G: DP Group                   :*
H: Object Name                :*
I: Result (All,S,F,N)         :ALL
J: Production/Test results    :None
K: Warning/Non-warning results:None
L: Comment contains           :*
M: Suppress comments         :No
N: Output file                :$S.#XYGATE.XDPSEC
O: Sort order                 :OBJECT
P: Operation                 :*
Q: User specified title       :*
V: Display OSS-PATHNAME       :No
X: Exit the report macro
Z: Run the audit report
ZP: Run the audit report and go into PERUSE and return here
   Hit Break or Control-Y to terminate
Selection?

Once the

Report Selection

screen appears, enter one letter at a time for the item(s)

you wish to change. After each entry, the

Report Selection

screen will appear again,

showing your selections. When you are satisfied with your selections, press

Z

to create

the report only or

ZP

to create the report and go into PERUSE.

XDP will generate the report and put you into the PERUSE program specified by the
PERUSE_OBJECT keyword in the DPCONF file. When you have examined, printed or
written the report to an edit file and type EXIT, you will be returned to the XDP

Report

Selection

screen where you can again change your selections.

To CLOSE the

Report Selection

screen, select

X

to return to your TACL prompt.

«
...
51
52
53
54
55
...
»

Summary of Contents for Trinitron WEGA KV-DZ29M91











































































































































































Reviews:

No comments