manualshive.com logo in svg

Sokkia iX-1001, Operator'S Manual, Page: 24 / 177

Share
Download
Sokkia iX-1001 Operator'S Manual Download Page 24

20

5. BASIC OPERATION

The capitalized letter in the Operating icon indicates the currently selected mode.

Allocating 

[ZA/%]

: "19.12 Allocating Operating Icons"

(3)Horizontal angle

Press 

[R/L] 

to switch the display status between HA-R (horizontal angle right)/HA-L (horizontal angle left). 

The capitalized letter in the Operating icon indicates the currently selected mode.

Allocating 

[R/L]

: "19.12 Allocating Operating Icons"

• Horizontal distance and height difference are also displayed in "SHVdist" display of Observation mode.

Measuring screen

Observation mode screen "Graphic" display

Following operations are available by switching Operating icons.

[CNFG]

:  In <Graphic configuration> the user can specify the orientation of the "graphic" display and 

which point, target or station, to set at the center of the display.

[DEF.]

:  Returns to the original orientation display.

[ZoomIn]

: Zooms  in.

[ZoomOut]

:Zooms out.

Laser is emitted

Instrument station

Scale

(units: m)

Arrow indicates north as set backsight

Target point

Summary of Contents for iX-1001


















































































































































































Reviews:

No comments