manualshive.com logo in svg

Sokkia iX-1001, Operator'S Manual, Page: 106 / 177

Share
Download
Sokkia iX-1001 Operator'S Manual Download Page 106

102

17.MISSING LINE MEASUREMENT

Missing line measurement is used to measure the slope distance, horizontal distance, and horizontal angle to 
a target from the target which is the reference (starting point) without moving the instrument.

• It is possible to change the last measured point to the next starting position.
• Measurement results can be displayed as the gradient between two points.

• It is possible to allocate Operating icons in measurement menus to suit various applications and the ways that 

different operators handle the instrument.

"19.12 Allocating Operating Icons"

PROCEDURE

1. Select "MLM" in <Menu>.

• When measurement data already exists, the 

screen of step 3 is displayed and measurement 
starts.

2. Sight the starting position and press 

[MEAS] 

to 

start measurement. 
Press 

[STOP]

 to stop measurement.

17.1 Measuring the Distance between 2 or more Points

Summary of Contents for iX-1001


















































































































































































Reviews:

No comments