manualshive.com logo in svg

Sokkia iX-1001, Operator'S Manual, Page: 107 / 177

Share
Download
Sokkia iX-1001 Operator'S Manual Download Page 107

103

17. MISSING LINE MEASUREMENT

3. Sight the target and press 

[MLM]

 

to begin 

observation

.

Press 

[STOP]

 to stop measurement.

Slope distance, grade, horizontal distance and 
height difference between the target and the 
starting position are displayed.

4. Sight the next target and press 

[MLM]

 to continue 

observation. Slope distance, grade, horizontal 
distance and height difference between multiple 
points and the starting position can be measured 
this way.

• Press 

[MEAS]

 to re-observe the starting position. 

Sight the starting position and press 

[MEAS]

.

• When 

[MOVE]

 is pressed, the last target 

measured becomes the new starting position to 
perform missing line measurement of the next 
target. 

"17.2 Changing the Starting Point"

5. Press 

{ESC}

 to end missing line measurement.

Results for current point

Results for measurement between starting 
position and second target

Summary of Contents for iX-1001


















































































































































































Reviews:

No comments