SMC Networks 7724M/VSW - annexe 1, Manual

Page: 35 / 387

CLI Management Guide
TigerAccess™ EE
34 SMC7824M/VSW
The switch also provides the simple instruction of calling the help string with the help
command. You can see the instruction using the command regardless of the configuration
mode.
To display the instruction of calling the help string for using CLI, use the following com-
mand.
Command Mode Description
help All
Shows the instruction of calling the help string for using
CLI.
3.3.2 Calling Command History
In case of installed command shell, you do not have to enter the command you entered
before. When you need to reuse the commands you did, use this arrow key <
↑
>. When
you press the arrow key, the commands will be displayed in the latest order.
The following is an example of calling command history after using several commands.
After using these commands in order:
show clock → configure terminal → interface 1
→ exit , press the arrow key < ↑ > and then you will see the commands from latest one:
exit → interface 1 → configure terminal → show clock .
SWITCH(config)# exit
SWITCH# show clock
Mon, 5 Jan 1970 23:50:12 +0000
SWITCH#
configure terminal
SWITCH(config)# interface 1
SWITCH(config-if)# exit
SWITCH(config)# exit
SWITCH# (press the arrow key ↑ )
SWITCH# exit (press the arrow key ↑ )
SWITCH# interface 1 (press the arrow key ↑ )
SWITCH# configure terminal (press the arrow key ↑ )
SWITCH# show clock (press the arrow key ↑ )
The switch also provides the command that shows the commands used before up to 100
lines.
Command Mode Description
show history
Enable
Global
Bridge Shows a command history.