CLI
Management Guide
TigerAccess™ EE
104
SMC7824M/VSW
The following is an example to change the name of CPE file into single file name after ex-
iting from FTP.
Input the port number connected to CPE which is supposed to install system image
.
Step 4
Install the system image file to the CPE.
Command Mode
Description
cpe nos-download
PORTS
Bridge
Upgrades the system image file of CPE, which is con-
nected through a port.
Step 5
To set the active OS of the CPE system, use the following command.
Command Mode
Description
cpe nos-active
PORTS
{
os1
|
os2
}
Bridge
Sets the default OS of the system.
To display the version of CPE system image and active OS, use the following command.
Command Mode
Description
show cpe-version
[
PORTS
]
Enable
Global
Bridge
Shows the version and active software image of CPE,
which is connected with a port.
PORT: VDSL port number
Step 6
Reboot the CPE in which new system image file is installed.
5.3.5.3
Installing CPE System Image File in Slave
With staking configured in this switch, you can install system image file in Slave after new
system image file of CPE is saved in Master RAM.
To install CPE system image file in Slave. Perform the below steps.
Step 1
Connect to Slave from Master.
SWITCH(bridge)#
rcommand
2
Trying 127.1.0.2...
Connected to 127.1.0.2.
Escape character is '^]'.
SWITCH login: root
Password:
SWITCH#
i
Summary of Contents for 7724M/VSW - annexe 1
Page 1: ......
Page 385: ...CLI Management Guide TigerAccess EE 384 SMC7824M VSW ...
Page 387: ......
