SMC Networks 7724M/VSW - annexe 1, Manual

Page: 256 / 387

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 255
To configure member port to aggregate to LACP, use the following command.
Command Mode Description
lacp port aggregation PORTS
{ aggregatable | individual }
Bridge
Configures the property of a specified member port for
LACP. (default: aggregatable)
To clear aggregated to LACP of configured member port, use the following command.
Command Mode Description
no lacp port aggregation PORTS Bridge
Deletes the configured property of a specified member
port for LACP.
8.2.2.5 BPDU Transmission Rate
Member port transmits BPDU with its information. For the switch, it is possible to config-
ure the BPDU transmission rate, use the following command.
Command Mode Description
lacp port timeout PORTS { short |
long }
Bridge
Configures BPDU transmission rate:
PORTS: select the port number.
short: short timeout (1 sec)
long: long timeout (30 sec: default)
To delete BPDU transmission rate, use the following command.
Command Mode Description
no lacp port timeout PORTS Bridge
Clears BPDU transmission rate of configured member
port, select the port number.
8.2.2.6 Administrational Key
Member port of LACP has key value. All member ports in one aggregator have same key
values. To make the aggregator consisted of specified member ports, configure the differ-
ent key value with the key value of another port.
Command Mode Description
lacp port admin-key PORTS <1-
15>
Bridge
Configures the key value of a member port:
PORTS: select the port number.
1-15: key value (default: 1)
To delete the key value of a specified member port, use the following command.
Command Mode Description
no lacp port admin-key PORTS Bridge
Deletes the key value of a specified member port, se-
lect the member port number.