background image

CLI 

Management Guide 

TigerAccess™ EE

 

246 

SMC7824M/VSW

 

To configure FID, use the following command. 

Command Mode 

Description 

vlan fid 

VLANS FID

 Bridge 

Configures 

FID. 

 

8.1.11 VLAN 

Translation 

VLAN Translation is simply an action of Rule. This function is to translate the value of 
specific VLAN ID which classified by Rule. The switch makes Tag adding PVID on 
Untagged packets, and use Tagged Packet as it is. That is, all packets are tagged in the 
Switch, and VLAN Translation is to change the VLAN ID value of Tagged Packet in the 
Switch. This function is to adjust traffic flow by changing the VLAN ID of packet. 

Step 1 

Open 

Rule Configuration

 mode using the 

flow 

NAME

 

create

 command. 

See Section 

7.6.2.1

Step 2 

Classify the packet that VLAN Translation will be applied by flow. 
See Section 

7.6.2.2

Step 3 

Designate the VLAN ID that will be changed in the first step by the 

match vlan

 <1-4094> 

command. 

Step 4 

Open 

Bridge Configuration

 mode using the 

bridge

 command. 

Step 5 

Add the classified packet to VLAN members of the VLAN ID that will be changed. 

 

8.1.12 Sample 

Configuration 

Sample Configuration 1: Configuring Port-based VLAN 

The following is assigning br2, br3, and br4 to port 2, port 3, and port 4. 

default br2 br3 br4

 

SWITCH(bridge)# 

vlan create

 

br2

 

SWITCH(bridge)# 

vlan create

 

br3

 

SWITCH(bridge)# 

vlan create

 

br4

 

SWITCH(bridge)# 

vlan del default

 

2-4

 

SWITCH(bridge)# 

vlan add

 

br2 2

 

untagged 

SWITCH(bridge)# 

vlan add

 

br3 3

 

untagged 

SWITCH(bridge)# 

vlan add 

br3 3

 

untagged 

Summary of Contents for 7724M/VSW - annexe 1




































































































































































































































































































































































































Reviews: