SMC Networks 7724M/VSW - annexe 1, Manual

Page: 179 / 387

CLI Management Guide
TigerAccess™ EE
178 SMC7824M/VSW
To display configured size of a token bucket, use the following command.
Command Mode Description
show qos max-bucketSize port Shows the token bucket size of all ports
show qos max-bucketSize port-
queue
PORTS
Global
Shows the token bucket size of each queue for port
7.6.3.5 Applying and modifying Policer
After configuring a policer using the above commands, apply it to the system with the fol-
lowing command. If you do not apply the policer to the system, all specified configurations
on
Policer Configuration mode will be lost. To save and apply a policer, use the following
command.
Command Mode Description
apply Policer Applies a policer to the system.
To modify a policer, use the following command.
Command Mode Description
policer NAME modify Global Modifies a policer, enter a policer name.
7.6.4 Rule Action
7.6.4.1 Policy Creation
To configure a policy, you need to open Policy Configuration mode first. To open Policy
Configuration mode, use the following command.
Command Mode Description
policy NAME create Global
Creates a policy and opens Policy Configuration mode.
NAME: policy name.
After opening Policy Configuration mode, the prompt changes from SWITCH(config)# to
SWITCH(config-policy[NAME])#.
To delete configured policy or all policies, use the following command.
Command Mode Description
no policy NAME Deletes a policy, enter a policy name.
no policy all
Global
Deletes all policies.
After opening Policy Configuration mode, a policy can be configured by user. The rule
priority and rule action(s) can be configured for each policy.
•
The policy name must be unique. Its size is limited to 32 significant characters.
i