Management Guide
CLI
TigerAccess™ EE
SMC7824M/VSW
211
By default, basic filtering policy provided by system is configured to permit all packets in
each port.
Sample Configuration
This is an example of blocking all packets in port 1 and port 3.
SWTICH(bridge)#
mac-filter default-policy deny
1-3
SWTICH(bridge)#
show mac-filter default-policy
-------------------------
PORT POLICY | PORT POLICY
------------+------------
1 DENY | 2 DENY
3 DENY | 4 PERMIT
5 PERMIT | 6 PERMIT
7 PERMIT | 8 PERMIT
9 PERMIT | 10 PERMIT
11 PERMIT | 12 PERMIT
13 PERMIT | 14 PERMIT
15 PERMIT | 16 PERMIT
17 PERMIT | 18 PERMIT
19 PERMIT | 20 PERMIT
21 PERMIT | 22 PERMIT
23 PERMIT | 24 PERMIT
25 PERMIT | 26 PERMIT
27 PERMIT | 28 PERMIT
29 PERMIT | 30 PERMIT
31 PERMIT | 32 PERMIT
33 PERMIT |
SWITCH(config)#
7.11.2
Adding Policy of MAC Filter
You can add the policy to block or to allow some packets of specific address after config-
uring the basic policy of MAC Filtering. To add this policy, use the following command in
Bridge Configuration
mode.
Command Mode
Description
mac-filter add
MAC-ADDRESS
{
deny
|
permit
} [<1-4094>]
[
PORTS
]
Bridge
Allows or blocks packet which brings a specified MAC
address to specified port.
To show a configuration about MAC filter policy, use the following command.
Command Mode
Description
show mac-filter
Enable
Global
Bridge
Shows MAC filter policy.
Summary of Contents for 7724M/VSW - annexe 1
Page 1: ......
Page 385: ...CLI Management Guide TigerAccess EE 384 SMC7824M VSW ...
Page 387: ......