SMC Networks 7724M/VSW - annexe 1, Manual

Page: 27 / 387

CLI Management Guide
TigerAccess™ EE
26 SMC7824M/VSW
3.1.1 Privileged EXEC View Mode
When you log in to the switch, the CLI will start with Privileged EXEC View mode which is
a read-only mode. In this mode, you can see a system configuration and information with
several commands.
Tab. 3.1 shows main command of Privileged EXEC View mode.
Command Description
enable Opens Privileged EXEC Enable mode.
exit Logs out the switch.
show Shows a system configuration and information.
Tab. 3.1 Main Command of Privileged EXEC View Mode
3.1.2 Privileged EXEC Enable Mode
To configure the switch, you need to open Privileged EXEC Enable mode with the enable
command, then the system prompt will changes from SWITCH> to SWITCH#.
Command Mode Description
enable View Opens Privileged EXEC Enable mode.
You can set a password to Privileged EXEC Enable mode to enhance security. Once set-
ting a password, you should enter a configured password, when you open Privileged EX-
EC Enable mode.
Tab. 3.2 shows main commands of Privileged EXEC Enable mode.
Command Description
clock Sets a system time and date.
configure terminal Opens Global Configuration mode.
reload Reboots the system.
telnet Connects to a remote host through telnet.
terminal length Configures the number of lines of the current terminal.
traceroute Traces a packet route.
where Displays users accessing the system via telnet or console.
Tab. 3.2 Main Command of Privileged EXEC Enable Mode