SKS Sweden Bonfiglioli Vectron ACTIVE CUBE ACU 201 Series, Operating Instructions Manual

Page: 103 / 260

09/08
Operating Instructions ACU
101
8.8 Language
The parameters are stored in the frequency inverter in various languages. The para-
meter description is displayed by the PC control software (e.g. VPlus) in the selected
Language
33.
Language
33 Function
0 - Deutsch Parameter description in German.
1 - English Parameter description in English.
2 - Italiano Parameter description in Italian.
8.9 Programming
The parameter
Program(ming)
34 enables acknowledgment of a fault message and
resetting to the factory settings. The display of the control unit reads "dEFLt" or "rE-
SEt" and the LEDs indicate the status of the frequency inverter.
Program(ming)
34 Function
111 - Parameter trans-
mission
Control unit P 500 is prepared for parameter transmis-
sion. A connected frequency inverter can receive data
from the control unit.
110 - Standard opera-
tion
Resetting of control unit KP 500 to standard operation
mode
123 - Reset
The current error message can be acknowledged via
digital input S1IND/STOA or the software parameter.
The display of the control unit reads "rESEt".
4444 - Default
The parameters of the selected configuration, except for
a few exceptions, are reset to the default settings. The
display of the control unit reads "dEFLt".
Note: Parameters
Control level
28,
Language
33 as well as
Configuration
30
are not changed during resetting to factory settings (
Program(ming)
34
= 4444).
Operating Instructions ACU 101 09/08