SKS Sweden Bonfiglioli Vectron ACTIVE CUBE ACU 201 Series, Operating Instructions Manual, Page: 102 / 260

100
Operating Instructions ACU
09/08
In the table, you will find a list of functions which are available in the different configurations.
Configuration
V/f
Characte-
ristic
field-oriented control
sensorless sensorless sensor
Servo
Function Chapter
110 111 410 411 430 210 211 230 510 530
Speed control 16.5.3 x x x x x x x
Torque control 16.5.2 x x x
Switch-over speed
/torque control
14.4.6 x x x
Dynamic voltage pre-control 15.1 x x
Intelligent current limits 16.1 x x x x x x x x x x
Voltage controller 16.2 x x x x x x x x x x
Technology controller: 16.3 x x x
−
pressure control 16.3 x x x
− Volume flow control 16.3 x x x
−
Contents level control 16.3 x x x
− Speed control 16.3 x x x
Slip compensation 16.4.1 x
Current limit value controller 16.4.2 x x
Current Controller 16.5.1 x x x x x x x x
Limit Value Sources 16.5.2.1 x x x x x x x x
Acceleration Pre-Control 16.5.4 x x x x x x x x
Field Controller 16.5.5 x x x x x x
Modulation Controller 16.5.6 x x x x x x
Starting behavior: 11.1 x x x x x x x x x x
− Starting current impres-
sion
11.1.1.1 x x x x x
− Flux Formation 11.1.2 x x x x x x
Stopping behavior: 11.2 x x x x x x x x x x
− Direct current brake 11.3 x x
Auto Start 11.4 x x x x x x x x x x
Search Run 11.5 x x x x x x x x x x
Reference point positioning 11.6.1 x x x x
Axle Positioning 11.6.2 x x
Frequency reference channel 13.4 x x x x x x x
Reference percentage chan-
nel
13.5 x x x x x x
Fixed Frequencies 13.6.1 x x x x x x x x x
Fixed Percentages 13.6.3 x x x x x x
Block Frequencies 13.9 x x x x x x x x x
PWM-/repetition frequency
input
13.11 x x x x x x x x x x
Brake chopper 17.4 x x x x x x x x x x
Motor protection switch 17.5 x x x x x x x x x x
V-belt Monitoring 17.6 x x x x x x x x x x
Motor Chopper 17.7.1 x x x x x x
Temperature Adjustment 17.7.2 x x x x x x
Speed Sensor Monitoring 17.7.3 x x x
Operating Instructions ACU 09/08 100