Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by
ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by
ŠKODA AUTO A. S.
�
4
Tail lights
⇒ “4.1 Octavia”, page 122
⇒ “4.2 Octavia Combi”, page 123
4.1
Octavia
⇒ “4.1.1 Summary of components”, page 122
⇒ “4.1.2 Removing and installing lamp holder and bulbs”,
page 122
⇒ “4.1.3 Removing and installing tail light”, page 122
4.1.1
Summary of components
1 - Fixing nuts, 3 Nm
2 - Body
3 - Twin filament light bulb for the brake and parking light
(P21/4W, 12 V, 21/4 W)
4 - Light bulb for the turn signal light (PY21W, 12 V, 21 W)
5 - Lamp holder; removing and installing
⇒ page 122
6 - Tail light housing
7 - Twin filament light bulb for the rear fog light and parking light
(P21/4W, 12 V, 21/4 W)
8 - Light bulb for the reversing light (P21W, 12 V, 21 W)
9 - Light bulbs for the parking light (W3W, 12V, 3 W)
4.1.2
Removing and installing lamp holder
and bulbs
Removing
– Switch off the ignition and all electrical consumers!
– Swing the cover of the tail light in the luggage compartment to
one side and disconnect the plug connector -2-.
– Press together locking arms -arrows- and remove bulb holder
-1-.
– Remove the bulbs from the lamp holder.
Installing
The installation occurs in reverse order.
4.1.3
Removing and installing tail light
Removing
– Switch off the ignition and all electrical consumers!
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
122
Rep. gr.94 - Lights, bulbs, switches - exterior