Simrad ER60, Operator'S Manual

Page: 17 / 182

Display views
9
850-164692 / Rev.B
Single Target Position
The Single Target Position view is normally located in the top
left corner.
This view shows the position within the beam
of the detected single echoes for the current
ping (largest circles) and the three previous
pings (smaller circles), all in the active layer.
The colours used to display this information
are determined from current target strength
(TS) value and the settings in the
Colour
scale .
If you place the cursor inside the view, a small
yellow label will appear to give you a detailed
readout of certain information. The
Tooltip
dialogue defines which information that will
be shown.
If you click the right mouse button with the
cursor position within this view, a dedicated
shortcut menu will appear. If you press the
middle mouse button, the
Single Target
Detection dialogue box will open.
Related topics
→
Channel windows, page 7
→
Colour Scale, page 13
→
Shortcut menu, page 44
→
Layer properties, page 90
→
Single Target Detection, page 117
→
Tooltip, page 122
(CD6974B)