Simrad ER60 Operator manual
78
850-164692 / Rev.B
Ethernet Output
The
Ethernet Output
dialogue box is accessed from the
Output
menu.
Purpose
This dialogue box is used to
specify the communication
settings for the EK500
Ethernet interface.
Note that additional data can
be output to Ethernet using
the data subscription
mechanisms in the
Data
Source
dialogue box.
To support programs which use data from the Simrad EK500
echo sounder, the ER60 can output a subset of the EK500
defined datagrams. This dialogue allows you to enable or
disable the EK500 datagram output to the Ethernet.
EK500 Datagram
Use this box to enable or disable the EK500 datagram output.
Click the button to open the
EK 500 Datagram
dialogue to set
up the individual datagrams.
Communication settings
Remote port
- Use the spin box to define the UDP port number
to which the data shall be transmitted. Note that parameter
request (PR) is only accepted on port 2000.
Remote IP address
- Use the spin boxes to define the IP
Address of the remote computer.
Local IP Address
- If you have more than one network cards in
your ER60 Processing Unit, use this box to select which
network card to use for output data.
Communication mode
- Choose
Broadcast
or
Point-to-Point
.
Related topics
→
Data Source, page 63
→
EK500 Datagram dialogue, page 73
→
Subscriptions and remote control, page 141
Summary of Contents for ER60
Page 2: ......
Page 3: ...850 164692 ER60 Scientific echo sounder Operator manual...
Page 181: ......