Simrad ER60, Operator'S Manual

Page: 135 / 182

Dialogue boxes and functions
127
850-164692 / Rev.B
Trawl
The Trawl dialogue box is accessed from the Install menu.
Purpose
This dialogue controls the
installation of trawl sensors.
Trawl information is used for
display of upper and lower
trawl line in the echogram.
All received speed data are
stored to file when recording
of raw data to file is enabled.
Use
Select input source from the
list, and set up the
communication interface.
Parameters
Port - Select one of the serial ports or LAN. If no trawl system
is connected, select None .
Setup - Click this button to open the applicable setup dialogue
to define the communication parameters.
System - Select ITI or PI30 trawl monitoring systems. Third
party systems are not supported.
If trawl opening and/or distance to trawl information is not
automatically available from a trawl system, the parameters can
be set manually.
Related topics
→
Serial Port Setup dialogue, page 116
→
LAN Port Setup dialogue, page 89