Simrad ER60, Operator'S Manual

Page: 178 / 182

Simrad ER60 Operator manual
170
850-164692 / Rev.B
Parameter description
Introduction
The ParameterServer component can be used to access
asynchronous and ping based parameters. The parameters can be
“read”, “set” or subscribed to. A subscription will notify only
when the parameter’s value is changed.
The following is a list of the most relevant parameters. The
parameter name must be used when working with parameters as
described in the
Parameter Management chapter.
Parameters identified as “read only” (R/O) can not be set. Some
of them, for example sensor parameters, can be set, but the new
value will immediately be overwritten if a live sensor is
connected.
Related topics
→
Parameter management, page 155
Descriptions
Description Parameter name R/O Range Unit
PING BASED
List of ChannelID’s TransceiverMgr/
Channels
Yes N/A --
Frequency TransceiverMgr/
<ChannelID>/
Frequency
Yes 1,000 to
1,000,000
Hz
Pulse Length TransceiverMgr/
<ChannelID>/
PulseLength
No 0.000 to
0.065535
sec
Sample Interval TransceiverMgr/
<ChannelID>/
SampleInterval
No 0.000010 to
0.065535
sec
Transmit Power TransceiverMgr/
<ChannelID>/
TransmitPower
No 0 to 10,000 W
Absorption Coefficient TransceiverMgr/
<ChannelID>/
AbsorptionCofficient
Yes 0.0 to 0.3 dB/m
Sound Velocity TransceiverMgr/
<ChannelID>/
SoundVelocity
No 1,400 to 1,700 m/s
Transducer Name TransceiverMgr/
<ChannelID>/
TransducerName
Yes N/A --