Simrad ER60 Operator manual
20
850-164692 / Rev.B
Transceiver installation
Use the following procedures to install, modify or delete
frequency channels from the echo sounder set-up.
Background
General Purpose Transceivers (GPT) physically connected to the
echo sounder’s ethernet interface are identified automatically by
the system. When you open the
Transceiver Installation
dialogue box from the
Install
menu, a list will be provided.
A single frequency transceiver occupies one entry in the list.
This entry is identified as a
Frequency Channel
, and the line
displays the parameters for the channel. Entries in the frequency
channel list are shown in
black
,
green
,
blue
or
red
colour
identifying its current status.
To install a channel
1
Select
Transceiver
on the
Install
menu.
- The
Transceiver Installation
dialogue box opens, and
you are allowed to make changes.
2
Click the desired entry (one of the black colour line
alternatives) in the
Frequency Channel Selection
list.
3
Assign a transducer by selecting a transducer name in the
Transducer Selection
list.
4
Click
OK
.
To uninstall a channel
1
Select
Transceiver
on the
Install
menu.
- The
Transceiver Installation
dialogue box opens, and
you are allowed to make changes.
2
Click the desired entry in the
Frequency Channel
Selection
list.
3
Select the alternative NONE in the
Transducer Selection
list.
4
Click
OK
.
Related topics
→
Transceiver Installation, page 123
Summary of Contents for ER60
Page 2: ......
Page 3: ...850 164692 ER60 Scientific echo sounder Operator manual...
Page 181: ......