Simrad ER60, Operator'S Manual

Page: 164 / 182

Simrad ER60 Operator manual
156
850-164692 / Rev.B
The server application will respond with a Response message.
The GetParameter method has the following output
parameters.
Parameter name Description
Value The value of the parameter
Time The time when the parameter was
u r pdated
An example of the contents of the Response field of a
GetParameter command to the ParameterServer is shown
below.
<response>
<clientInfo>
<cid dt=”3”>1</cid>
<rid dt=”3”>28</rid>
</clientInfo>
<fault>
<detail>
<errorcode dt=”3”>0</errorcode>
</detail>
</fault>
<GetParameterResponse>
<paramValue>
<value>60</value>
<time>0</time>
<paramValue/>
<GetParameterResponse/>
</response>
Set parameter
The method part of the request shall be set to SetParameter .
The SetParameter method has the following input parameters.
Parameter name Description
paramName Full name of the current
parameter
paramValue The new value to update the
parameter with
paramType The data type of the paramValue
field
An example of the contents of the Request field of a
SetParameter command to the ParameterServer is shown
below.
<request>
<clientInfo>
<cid>1</cid>
<rid>28</rid>
</clientInfo>
<type>invokeMethod</type>