Simrad ER60, Operator'S Manual

Page: 18 / 182

Simrad ER60 Operator manual
10
850-164692 / Rev.B
Single Target Histogram
The Single Target Histogram view is normally located in the
bottom left corner of the display presentation.
The histogram plot shows a visualisation of the
target strength (TS) distribution for the single
echoes detected in the
Echogram view The colours
used to display this information are determined from
the current target strength (TS) value and the
settings in the
Colour scale . The statistics are based
on the active layer and the current calculation
interval.
If you place the cursor inside the view, a small
yellow label will appear to give you a detailed
readout of certain information. The
Tooltip dialogue
defines which information that will be shown.
If you click the right mouse button with the cursor
position within this view, a dedicated shortcut menu
will appear. If you press the middle mouse button,
the
Single Target Detection dialogue box will open.
Related topics
→
Channel windows, page 7
→
Colour Scale, page 13
→
Shortcut menu, page 44
→
Calculation interval, page 54
→
Layer Properties, page 90
→
Single Target Detection, page 117
→
Tooltip, page 122
(CD6974C)