Simplicity AGCO Allis 2000 Series, Service & Repair Manual

Page: 94 / 312

7 - 26
Loose, broken, or dirty
connectors or wiring.
Refer to
A. Check/Clean
Wires and Connectors.
Replace/repair damaged
wires or connectors.
Component Tests OK
Component
Fails Test
Battery connections dirty or
loose, or worn battery.
Refer to
C. Battery Tests.
Replace/repair battery
cables or replace battery.
Component Tests OK
Component
Fails Test
Dead battery. Refer to
C. Battery Tests.
Charge or replace
battery.
Component Tests OK
Component
Fails Test
Circuit Breaker Malfunction. Refer to
P. Circuit Breaker
Test.
Replace circuit breaker.
Component Tests OK
Component
Fails Test
Worn or malfunctioning
ignition switch
Refer to
H. Ignition Switch
Tests.
Replace ignition switch.
Component Tests OK
Component
Fails Test
Worn or failed PTO switch. Refer to
I. PTO Switch Test.
Replace PTO switch.
Component Tests OK
Component
Fails Test
Worn or malfunctioning
brake pedal switch.
Refer to
M. Brake Pedal
Switch Tests.
Replace the brake pedal
switch.
Component
Fails Test
Engine will not turn over: (All Models)
Loose, broken, or dirty
ground connection.
Refer to
B. Check/Clean
Ground Cable.
Replace/repair damaged
ground connection.
Component Tests OK
Component
Fails Test
7 Electrical System Service
Troubleshooting Charts
Worn or malfunctioning
starter solenoid.
Refer to
Engine Manual.
Replace the solenoid.
Component Tests OK
Component
Fails Test
Worn or malfunctioning
starter.
Refer to
Engine Manual.
Replace damaged wires
or connectors.
Component
Fails Test
Done
Component Tests OK
Worn or malfunctioning
cruise control switch.
Refer to
K. Cruise Control
Switch Test.
Replace the cruise
control switch.
Component
Fails Test
Component Tests OK
Not
for
Reproduction