Sierra Wireless AirCard 550, User Manual

Page: 36 / 175

Section 2: Installing the PCS Connection Card
30 2B: Installation on Handheld and Pocket PCs
Installing the PCS Connection Manager
SM
Software
To install the software, you can either:
䊳
Connect the host and the Handheld/Pocket PC before you install the
software to the host. (In this case, you are prompted to initiate the
download as soon as the software installation is complete.)
– or –
䊳
Install the software to the host and then connect the host and the
Handheld/Pocket PC, as described here.
This process installs the PCS Connection Manager Software and the
PCS Connection Card drivers.
Installing the PCS Connection Manager Software on the Host
To install the software on the host:
1.
Close any Windows programs that are running and insert the
PCS Connection Manager installation CD in your CD-ROM drive.
The CD should auto-start and display a menu.
2.
If the CD does not auto-start, select
Start > Run
and enter
d:\launch.exe
where
d
is the drive letter of your CD-ROM drive.
3.
From the CD start-up window, select:
䊳
Pocket PC installation and documentation
then
Pocket PC
software installation
(if you have a Pocket PC running
Windows CE 3.0 MS Pocket PC), or
䊳
Pocket PC 2002 installation and documentation
then
Pocket PC 2002 software installation
(if you have a Pocket PC
running Windows CE 3.0 Pocket PC 2002), or
䊳
Handheld PC 2000 installation and documentation
then
Handheld PC 2000 software installation
(if you have a
Handheld PC running Windows CE 3.0)
This launches the InstallShield
®
Wizard that installs the software to
the host.
4.
Use the
Next
and
Back
buttons to navigate through the wizard
noting the following:
䊳
You must indicate your acceptance of the terms of the license
agreement by clicking
Yes
to proceed with the installation.