Siemens TXP-CLC, Manual

Page: 201 / 216

TXP CLC Course
12
CP 1430
1. Obtain MAC-addresses
•
Open the YDH-drawing.
•
Click on the symbol of the CP1430 you want to change.
•
Open the module properties.
•
Read the MAC-addresses. Address 1 is for the upper rack, address 2 for
the lower rack.
2. Initialize CP1430
•
Hook up the PG740 to the CP1430
•
Start the S5-software
•
In the main menu line: select: “Change->further”
•
Select the directory COM1430, if not already selected
•
Select SINEC NCM COMs in this directory
•
Select “CP-Functions->Stop” from the main menu line. The “Stop”-light at
the CP should go on
•
Select “Edit->CP Init” from the main menu line. Editing of the fields should
be possible
•
Enter the MAC-address and the Basis SSNR (232 for the upper rack (AP
A), 236 for the lower rack (AP B)) and hit F7 (ok)
•
Select “CP-Functions->Start” from the main menu line. The “Stop”-light at
the CP should go off (if there is code in the CPU) and the “Run” light
should go on
•
Select “Utilities” then “Clock Functions”
•
Press F2 to set time. Enter the current date and time (Winter time of the
local time zone must be set; date is in DDMMYY format)
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
13