Siemens TXP-CLC, Manual, Page: 93 / 216

TXP CLC Course
6
Exercise 1
Logins and Passwords
The training project will be performed by groups on the ES680 work stations. All
groups will use the same Login and a Password.
Login: train75
Password: /1train75
Login to your workstation and launch the FUP Editor. Initial settings have
been created for your training project using the following FC, FGC, and AS
data:
FC= 01 Auxilliary Plant
FGC= YPAC01 Cooling Water System
AS= 1 Automation Processor # 1
Using the following instructions on FUP editor handling, create a YFH
diagram similar to the attached diagram.
Function Plan Editor Handling
The Function Plan editor (FUP) is used to create function diagrams. Function
blocks can be positioned on diagram pages; their inputs and outputs connected
via connection lines; their inputs and outputs linked beyond the edges of the
diagram with the inputs and outputs of other diagrams, etc. Also, process
engineering parameters and values can be inserted and the diagram title blocks
can be edited.
Following are brief descriptions of how to perform common tasks with the FUP
editor.
Starting the function diagram editor:
From the TXP ES680 Main Menu: Click on Edit then FUP-Editor
Depending on the type of work-station being used, it could take up to 5
minutes to start.
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
1