License management
17.3 Assigning via Automation License Manager
Manual
584
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
NOTICE
Carefully check the suggested license assignment. An adjustment may be required if:
•
you wish to use a license number that differs from the number suggested
•
you wish to use a license package rather than single licenses
•
you wish to assign greater or fewer licenses than suggested for any reason
You can no longer undo the assignment independently.
The procedure for transferring the updated license information from a control image (offline)
to a control system (online) is described in Subsection "Transfer license information of a
control image (offline) to a control (online)" (Page 584).
Result
The license information for the control system (online) or control image (offline) is now
identical to the information for the relevant hardware in the license database, including the
License Key.
17.3.9
Transferring license information for a control image (offline) to a control system
(online)
Background
It is essential to transfer the license information for a control image (offline) to a control
system (online), i.e. the hardware for a SINUMERIK control, for the following reasons:
●
The control system (online) is not connected to the Internet, e.g. for security reasons.
License information is initially only updated based on a control image (offline). The
computer on which the Automation License Manager is running is then disconnected from
the Internet and connected to the relevant SINUMERIK control system to transfer the
license information.
●
After a service call, the license information should be transferred from an archive file to a
SINUMERIK control system.
Requirements
To transfer license information for a control image (offline) to a control system (online) the
following requirements must be met:
●
The Automation License Manager must be communicating with the control system.
A detailed description of how to define parameters for TCP/IP communication with a
control system is given in Subsection "Parameterize TCP/IP communication with a control
●
The hardware serial number of the control image (offline) and the control system (online)
must be identical.