Alarm image switching
78
Siemens Building Technologies
Fire Safety & Security Products
06.2008
z
Each matrix output appears as a monitor icon.
z
The monitor number is displayed directly under the monitor symbol.
z
Representation of the parameter settings, as entered in the
Setting alarm image
switching mode on output x
dialogue screen (see section 12.2.2).
z
Alarm zone
The alarm zones that transmit alarm images to the relevant monitor are
indicated below the monitor number.
z
Representation of a video recorder
If
an alarm monitor activates a control output, a representation of a video
recorder along with the control output number (VTR: x) appears above the
monitor icon.
z
Monitor string for alarm image switching
Where a number of monitors form a monitor string, a black box will appear
around the corresponding monitors.
z
First alarm monitor
The first monitor in a string of alarm monitors is displayed in
red
(alarm master
monitor). Single monitors that have been enabled for alarm image switching are
also displayed in the same way.
Alarm image switching only needs to be enabled for the alarm master monitor, not for the slave
monitors.
The alarm master monitor is also shown in the
Video mode configuration
dialogue screen
(see section 5.1).
z
Representation of the parameter settings, as entered in the
Alarm reset mode
and stack alarm handling
dialogue screen (see section 13).
Alarm image
sequence
The monitor that has been set for alarm image sequence display in the
Alarm
reset mode and stack alarm processing
dialogue screen, appears as an
alarm monitor with a camera icon and a cycle icon.
Only one monitor in the entire system can be programmed in this way, and this
is only possible in combination with the ‘Stack alarm’ option.
The image interval time is adjustable (see section 13.2).
Use the ‘Print’ button to print the alarm output settings. The print-out replicates the
screen display. The information for a maximum of 16 monitors can be printed each
time.
12.2.1 Reset
dialogue
The
Reset dialogue
button opens the
Alarm reset mode and stack alarm handling
dialogue screen (see section 13) where you can program alarm reset behaviour.