Siemens SIMATRIX Programming Manual Download Page 110

Page: 110 / 114

Remote control and message reception

110

Siemens Building Technologies

Fire Safety & Security Products

06.2008

16.2 Messages from the video matrix

This window displays messages sent by the SIMATRIX to the PC. For example,
the alarm sensor that has been triggered is shown in the event of an alarm.

<ACK> stands for Acknowledge and means acceptance of the transmitted data.

<NAK> stands for Negative Acknowledge and means non-acceptance, for example
if the transmitted data is incorrect.

If more messages have been transmitted than can be displayed in the window, the
scroll bar on the right can be used to scroll through the window.

The

Clear

button deletes the content of the message window.

Summary of Contents for SIMATRIX



















































































































Search results

Summary of Contents for SIMATRIX

Reviews:

Related manuals for SIMATRIX

Brands by name

Popular brands

Siemens SIMATRIX, Programming Manual

Search results

Summary of Contents for SIMATRIX

Reviews:

Related manuals for SIMATRIX

Brands by name

Popular brands